Place this Hobo Stove™  accessory onto the fire base of your 'Base Camp' or 'Scout' Kettle to create a highly effective wood-fired Camp Stove.

Directions for use

1. Place the Hobo Stove on the Kettles fire-base with the wide rim of the Hobo sitting on the fire-base.
2. Face the circular hole of the fire-base into the wind. Face the large 'feeder' hole in the side of the Hobo Stove away from the wind.
3. Add fuel as required via the top, side 'feeder' hole of the Hobo Stove, or via the hole in the fire-base.
4. Place any size pot or pan on the Hobo Stove to cook

Allow to cool fully before packing. Just flip the Hobo Stove over and it fits perfectly inside the fire-base!

The fire-base becomes extremely hot and will scorch the ground underneath. So where possible 'leave no trace'' and set up on a non-combustible surface (like sand, gravel, or large stone) or use our simple Support under the fire-base to insulate the ground from the heat.
In an emergency, the Hobo Stove can be used without the fire-base if a surface for cooking is needed. Simply place the Hobo Stove on the ground and build the fire inside.

Cost-FREE to run! Never carry fuel again! Never run out of fuel again! Simply gather deadwood, twigs, dry grass, pine cones, or whatever natural fuel you find lying around in the area - and cook your meal.

Any size pot or pan can be used on the Hobo Stove™
Takes up no extra space .... it fits neatly inside the fire base of your kettle for storage.   In fact, our cup set fits inside our steel cook pot, which fits inside the Hobo, which fits inside the fire base.
Made from 0.7mm Stainless Steel
Weight: 0.16kg / 0.35lb
Height: 67mm, Diameter 152mm

Note: This Hobo stove will not fit the fire base of the smaller 'Trekker' Kettle. We recommend the Hobo Stove be used with our Stainless Steel fire-bases as Aluminium fire-bases can warp and melt from the intense heat.